Filter
Top Products
Replacing the Control-Buttons
Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Connect the control-buttons board cable to the connector on the
control-buttons board.
2 Replace the control-buttons board into the slot on the display bezel.
3 Align the screw hole on the ground cable with the screw hole on the
display-panel base.
4 Replace the screw that secures the ground cable to the display-panel
base.
Post-requisites
1 Replace the back cover.
2 Replace the stand assembly.
45