Filter
Top Products
Replacing the I/O Bracket
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Slide the power port through the I/O bracket.
2 Align the screw holes on the I/O bracket with the screw holes on the
display-panel base.
3 Replace the screws that secure the I/O bracket to the display-panel base.
4 Align the screw holes on the power port with the screw holes on the I/O
bracket.
5 Replace the screws that secure the power port to the I/O bracket.
Post-requisites
1 Replace the power-supply diagnostic board.
2 Replace the VESA-mount bracket.
3 Replace the system-board shield.
4 Replace the back cover.
5 Replace the stand assembly.
63