Filter
Top Products
Replacing the Camera
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer. After working inside your
computer, follow the instructions in After Working Inside Your
Computer. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Connect the camera cable to the camera module.
2 Align the screw hole on the ground cable and the camera module with
the screw hole on the display bezel.
3 Replace the screw that secures the ground cable and the camera module
to the display bezel.
Post-requisites
1 Follow the procedure from step 11 to step 17 in "Replacing the Display
Panel".
2 Replace the system board.
3 Replace the coin-cell battery.
4 Replace the wireless card.
5 Replace the processor.
6 Replace the processor fan.
7 Replace the processor heat-sink.
8 Replace the power-supply unit.
9 Replace the power-supply fan.
10 Replace the optical drive.
11 Replace the I/O bracket.
12 Replace the power-supply diagnostic board.
13 Replace the converter board.
14 Replace the control buttons board.
15 Replace the VESA-mount bracket.
16 Replace the hard drive.
17 Replace the system-board shield.
95