Filter
Top Products
224 Adding and Replacing Parts
6
If you are installing a floppy drive:
a
Connect the power cable from to the back of the floppy drive.
b
Connect the data cable to the back of the floppy drive.
7
If you are installing a Media Card Reader,
connect the data cable to the
back of the Media Card Reader.
8
Connect the other end of the data cable to the system board connector
labeled "FLOPPY" (for a floppy drive) or "USB1" (for a Media Card
Reader). To locate system board connectors, see "System Board
Components" on page 148.