Filter
Top Products
84 System Setup
SMART Reporting
(
Off
default)
Specifies whether hard drive errors for internal drives are
reported during system startup.
•
Off
— Errors are not reported.
•
On
— Errors are reported.
Onboard Devices
Integrated NIC
(
On
default)
Enables or disables the integrated network interface controller
(NIC).
•
Off
— The integrated NIC is disabled.
•
On
— The integrated NIC is enabled.
•
On w/PXE
— The integrated NIC is on (with PXE enabled).
•
On w/RPL
— The integrated NIC is on (with RPL enabled).
NOTE: PXE or RPL is required only if you are booting to an
operating system located on another computer. If a boot routine is
not available from the remote system, the computer attempts to
boot from the next device listed in the boot sequence.
Integrated Audio
(
Auto
default)
Enables or disables the integrated audio controller.
•
Off
— Integrated audio is disabled.
•
Auto
— Use the add-in Audio controller.
•
On
— Integrated audio is enabled.
USB Controller
(
On
default)
Enables or disables the internal USB controller.
•
Off
— The USB controller is disabled.
•
On
— The USB controller is enabled.
•
No Boot
— The USB controller is enabled; however, the BIOS
will not recognize USB storage devices.
NOTE: Operating systems with USB support will recognize USB
storage devices regardless of the No Boot setting.
Rear Quad USB
(
On
default)
Enables or disables the rear quad USB ports.
•
Off
— The USB group is disabled.
•
On
— The USB group is enabled.
Rear Dual USB
(
On
default)
Enables or disables the rear dual USB ports.
•
Off
— The USB group is disabled.
•
On
— The USB group is enabled.