Filter
Top Products
Command Groups 117
ip dhcp excluded-address Excludes one or more DHCP addresses from
automatic assignment.
GC
ip dhcp ping packets Configures the number of pings sent to detect if
an address is in use prior to assigning an address
from the DHCP pool.
GC
lease Sets the period for which a dynamically
assigned DHCP address is valid.
DP
netbios-name-server Configures the IPv4 address of the Windows
®
Internet Naming Service (WINS) for a
Microsoft DHCP client.
DP
netbios-node-type Sets the NetBIOS node type for a Microsoft
DHCP client.
DP
network Defines a pool of IPv4 addresses for distributing
to clients.
DP
next-server Sets the IPv4 address of the TFTP server to be
used during auto-install.
DP
option Supplies arbitrary configuration information to
a DHCP client.
DP
service dhcp Enables local IPv4 DHCP server on the switch. GC
sntp Sets the IPv4 address of the NTP server to be
used for time synchronization of the client.
DP
show ip dhcp binding Displays the configured DHCP bindings. PE
show ip dhcp conflict Displays DHCP address conflicts for all relevant
interfaces or a specified interface.
PE
show ip dhcp global
configuration
Displays the DHCP global configuration. PE
show ip dhcp pool Displays the configured DHCP pool or pools. UE or
PE
show ip dhcp server
statistics
Displays the DHCP server binding and message
counters.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Mode
a
2CSPC4.XCT-SWUM2XX1.book Page 117 Monday, October 3, 2011 11:05 AM