Filter
Top Products
RADIUS Commands 703
The following attributes are processed in the RADIUS Access-Accept
message received from a RADIUS server:
•NAS-PORT
– ifIndex of the port to be authenticated
• REPLY-MESSAGE
– Trigger to respond to the Access-Accept message with an EAP
notification
•STATE
– RADIUS server state. Transmitted in Access-Request and Accounting-
Request messages.
• SESSION-TIMEOUT
– Session timeout value for the session (in seconds). Used by both
802.1x and Captive Portal.
• TERMINATION-ACTION
– Indication as to the action taken when the service is completed.
• EAP-MESSAGE
– Contains an EAP message to be sent to the user. This is typically used
for MAB clients.
• VENDOR-SPECIFIC
– No actions configured at this time.
61 NAS-PORT-TYPE Yes No No
64 TUNNEL-TYPE Yes No No
65 TUNNEL-MEDIUM-TYPE Yes No No
79 EAP-MESSAGE Yes No No
80 MESSAGE-AUTHENTICATOR Set by
RADIUS
client for
Accounting
No No
81 TUNNEL-PRIVATE-GROUP-ID Yes No No
Table 32-1. RADIUS Attributes Supported by PowerConnect Switch Service
Type RADIUS Attribute Name 802.1X User Manager Captive Portal
2CSPC4.XCT-SWUM2XX1.book Page 703 Monday, October 3, 2011 11:05 AM