Filter
Top Products
156 Command Groups
SSH
snmp-server community Sets up the community access string to permit
access to SNMP protocol.
GC
snmp-server community-
group
Maps SNMP v1 and v2 security models to the
group name.
GC
snmp-server contact Set
s up a system contact (sysContact) string.
GC
snmp-server enable traps Enables SNMP traps globally or enables specific
SNMP traps.
GC
snmp-server engineID local Specifies the Simple Network Management
Protocol (SNMP) engine ID on the local switch.
GC
snmp-server filter Creates or updates an SNMP server filter entry. GC
snmp-server group Configures a new SNMP group or a table that
maps SNMP users to SNMP views.
GC
snmp-server host Specifies the recipient of SNMP notifications. GC
snmp-server location Sets
the system location string.
GC
snmp-server user C
onfigures a new SNMP Version 3 user.
GC
snmp-server view Creates or updates a Simple Network
Management Protocol (SNMP) server view
entry.
GC
snmp-server v3-host Specifies the recipient of Simple Network
Management Protocol Version 3 (SNMPv3)
notifications.
GC
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Mode
a
crypto key generate dsa Generates DSA key pairs for the switch. GC
crypto key generate rsa Generates RSA key pairs for the switch. GC
crypto key pubkey-chain ssh Enters SSH Public Key-chain configuration
mode.
GC
ip ssh port Specifies the port to be used by the SSH server. GC
Command Description Mode
a
2CSPC4.XCT-SWUM2XX1.book Page 156 Monday, October 3, 2011 11:05 AM