Filter
Top Products
124 Command Groups
ipv6 pimsm dr-priority Sets the priority value for which a router is
elected as the designated router (DR).
IC
ipv6 pimsm hello-interval Administratively configures the PIM-SM Hello
Interval for the specified interface.
IC
ipv6 pimsm join-prune-
interval
Administratively configures the interface
join/prune interval for the PIM-SM router,
IC
ipv6 pimsm register-
threshold
Configures the Register Threshold rate for the
RP router to switch to the shortest path.
GC
ipv6 pimsm rp-address Statically configures the Rendezvous Point (RP)
address of a PIM for one or more multicast
groups.
GC
ipv6 pimsm rp-candidate Configures the router to advertise itself to the
bootstrap router (BSR) as a PIM candidate
rendezvous point (RP).
GC
ipv6 pimsm spt-threshold Configures the Data Threshold rate for the last-
hop router to switch to the shortest path on the
router.
GC
ipv6 pimsm ssm Defines the Source Specific Multicast (SSM)
range of multicast addresses.
GC
show ipv6 pimsm Displays global status of IPv6 PIMSM and its
IPv6 routing interfaces.
PE
show ipv6 pimsm bsr Displays the bootstrap router (BSR)
information.
PE
show ipv6 pimsm interface Displays interface config parameters. PE
show ipv6 pimsm neighbor Displays IPv6 PIM neighbors learned on the
routing interfaces.
PE
show ipv6 pimsm rphash Displays which rendezvous point (RP) is being
selected for a specified group.
PE
show ipv6 pimsm rp
mapping
Displays all group-to-RP mappings of which the
router is aware (either configured or learned
from the bootstrap router (BSR).
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 79.
Command Description Mode
a
2CSPC4.XCT-SWUM2XX1.book Page 124 Monday, October 3, 2011 11:05 AM