Filter
Top Products
1618 System Management Commands
Example – All Units in the Stack
This example displays information about all units in the stack.
console>show switch
Switch Management Preconfig Plugged-in Switch Code
Status Model ID Model ID Status Version
-------------------------------------------------------------
1 Mgmt Switch PCM8024 PCM8024 1.0.0.0
Different fields in the display are explained as follows:
Detected Code Version This field displays the version of code running
on this switch. If the switch is not present and
the data is from preconfiguration, the code
version is "None."
Detected Code in Flash This field displays the version of code that is
currently stored in FLASH memory on the
switch. This code will execute after the switch is
reset. If the switch is not present and the data is
from pre-configuration, then the code version is
"None."
Boot Code Version This field displays the version of the boot
strapping code.
Up Time This field displays the system up time.
Unit Description
Switch This field displays the unit identifier assigned to
the switch.
Management Status This field indicates whether the switch is the
Management Switch, a stack member, or the
status is unassigned.
Preconfigured Model Identifier This field displays the model identifier of a
preconfigured switch ready to join the stack.
The Model Identifier is a 32-character field
assigned by the switch manufacturer to identify
the switch.
Unit Description
2CSPC4.XCT-SWUM2XX1.book Page 1618 Monday, October 3, 2011 11:05 AM