Filter
Top Products
106 Command Groups
msgauth Enables the message authenticator attribute to
be used for the RADIUS Authenticating server
being configured.
R
name Assigns a name to a RADIUS server. R
primary Specifies that a configured server should be the
primary server in the group of authentication
servers which have the same server name.
R
priority Specifies the order in which the servers are to be
used, with 0 being the highest priority.
R
radius-server deadtime Improves RADIUS response times when servers
are unavailable. Causes the unavailable servers
to be skipped.
GC
radius-server host Specifies a RADIUS server host. GC
radius-server key Sets the authentication and encryption key for
all RADIUS communications between the
switch and the RADIUS daemon.
GC
radius-server retransmit Specifies the number of times the software
searches the list of RADIUS server hosts.
GC
radius-server source-ip Specifies the source IP address used for
communication with RADIUS servers.
GC
radius-server timeout Sets the interval for which a switch waits for a
server host to reply.
GC
retransmit Specifies the number of times the software
searches the list of RADIUS server hosts before
stopping the search.
R
show aaa servers Displays the list of configured RADIUS servers
and the values configured for the global
parameters of the RADIUS client.
UE or
PE
show radius-servers Displays the RADIUS server settings. PE
show radius-servers
statistics
Shows the statistics for an authentication or
accounting server.
PE
source-ip Specifies the source IP address to be used for
communication with RADIUS servers.
R
Command Description Mode
a
2CSPC4.XModular-SWUM200.book Page 106 Thursday, March 10, 2011 11:18 AM