Filter
Top Products
802.1x Commands 785
Clients Authenticated using Dot1x.............. 1
Logical Interface.............................. 16
Interface...................................... gi1/0/2
User Name...................................... 000102030405
Supp MAC Address............................... 00:01:02:03:04:05
Session Time................................... 518
Filter Id......................................
VLAN Id........................................ 1
VLAN Assigned.................................. Default
Session Timeout................................ 0
Session Termination Action..................... Default
Logical Interface.............................. 96
Interface...................................... gi1/0/7
User Name...................................... brcm
Supp MAC Address............................... 00:08:A1:7E:45:1A
Session Time................................... 67
VLAN Id........................................ 1
VLAN Assigned.................................. Monitor Mode
Session Timeout................................ 0
Session Termination Action..................... Default
show dot1x interface
This command shows the status of MAC Authentication Bypass. This feature
is an extension of Dot1x Option 81 feature added in Power Connect Release
2.1. to accept a VLAN name as an alternative to a number when RADIUS
indicates the Tunnel-Private-Group-ID for a supplicant.
Syntax
show dot1x interface {gigabitethernet
unit/slot/port
|
tengigabitethernet
unit/slot/port
}
2CSPC4.XModular-SWUM200.book Page 785 Thursday, March 10, 2011 11:18 AM