Filter
Top Products
110 Command Groups
protocol vlan group all Adds all physical unit/slot/port interfaces to the
protocol-based VLAN identified by
groupid
.
GC
show dvlan-tunnel Displays all interfaces enabled for Double
VLAN Tunneling.
PE
show dvlan-tunnel interface Displays detailed information about Double
VLAN Tunneling for the specified interface.
PE
show interfaces switchport Displays switchport configuration. PE
show port protocol Displays the Protocol-Based VLAN information
for either the entire system or for the indicated
group.
PE
show vlan Displays detailed information, including
interface information and dynamic vlan type,
for a specific VLAN.
PE
show vlan association mac Displays the VLAN associated with a specific
configured MAC address.
PE
show vlan association
subnet
Displays the VLAN associated with a specific
configured IP subnet.
PE
switchport access vlan Configures the VLAN ID when the interface is
in access mode.
IC
switchport forbidden vlan Forbids adding specific VLANs to a port. IC
switchport general
acceptable-frame-type
tagged-only
Discards untagged frames at ingress. IC
switchport general allowed
vlan
Adds or removes VLANs from a port in General
mode.
IC
switchport general ingress-
filtering disable
Disables port ingress filtering. IC
switchport general pvid Configures the PVID when the interface is in
general mode.
IC
switchport mode Configures the VLAN membership mode of a
port.
IC
switchport trunk Adds or removes VLANs from a trunk port. IC
Command Description Mode
a
2CSPC4.XModular-SWUM200.book Page 110 Thursday, March 10, 2011 11:18 AM