Filter
Top Products
174 Using the CLI
Global Configuration Mode
Global Configuration commands apply to features that affect the system as a
whole, rather than just a specific interface. The Privileged EXEC mode
command configure is used to enter the Global Configuration mode.
console(config)#
The following are the Global Configuration modes:
•
SNMP v3 Host Configuration
— Configures the parameters for the
SNMP v3 server host.
•
SNMP Community Configuration
— Configures the parameters for the
SNMP server community.
Interface and Other Specific Configuration Modes
Interface configuration modes are used to modify specific interface
operations. The following are the Interface Configuration and other specific
configuration modes:
•
MST
— The Global Configuration mode command spanning-tree mst
configuration is used to enter into the Multiple Spanning Tree
configuration mode.
•
Line Interface
— Contains commands to configure the management
connections. These include commands such as line speed and timeout
settings. The Global Configuration mode command
line
is used to enter
the Line Interface mode.
•
VLAN Database
— Contains commands to create a VLAN as a whole.
The Global Configuration mode command
vlan database
is used to enter
the VLAN Database mode.
•
Router OSPF Configuration
— Global configuration mode command
router ospf
is used to enter into the Router OSPF Configuration mode.
•
Router RIP Configuration
— Global configuration mode command
router rip
is used to enter into the Router RIP Configuration mode.
•
Router OSPFv3 Configuration
— Global configuration mode command
ipv6 router ospf
is used to enter into the Router OSPFv3 Configuration
mode.
•
IPv6 DHCP Pool Mode
— Global configuration mode command
ipv6
dhcp pool
is used to enter into the IPv6 DHCP Pool mode.
2CSPC4.XModular-SWUM200.book Page 174 Thursday, March 10, 2011 11:18 AM