Filter
Top Products
112 Command Groups
dot1x max-users Sets the maximum number of clients supported
on the port when MAC-based 802.1X
authentication is enabled on the port.
IC
dot1x port-control Enables manual control of the authorization
state of the port.
IC
dot1x re-authenticate Manually initiates a re-authentication of all
802.1x-enabled ports or a specified 802.1X
enabled port.
PE
dot1x reauthentication Enables periodic re-authentication of the client. IC
dot1x system-auth-control
monitor
Enables 802.1X globally. GC
dot1x timeout guest-vlan-
period
Sets the number of seconds that the switch
waits before authorizing the client if the client
is a dot1x unaware client.
IC
dot1x timeout quiet-period Sets the number of seconds the switch remains
in the quiet state following a failed
authentication attempt.
IC
dot1x timeout re-
authperiod
Sets the number of seconds between re-
authentication attempts.
IC
dot1x timeout server-
timeout
Sets the number of seconds the switch waits for
a response from the authentication server
before resending the request.
IC
dot1x timeout supp-
timeout
Sets the number of seconds the switch waits for
a response to an EAP-request frame from the
client before retransmitting the request.
IC
dot1x timeout tx-period Sets the number of seconds the switch waits for
a response to an EAP-request/identify frame
from the client before resending the request.
IC
show dot1x Displays 802.1X status for the switch or the
specified interface.
PE
show dot1x authentication-
history
Displays the dot1x authentication events and
information during successful and unsuccessful
dot1x authentication processes.
PE
Command Description Mode
a
2CSPC4.XModular-SWUM200.book Page 112 Thursday, March 10, 2011 11:18 AM