Filter
Top Products
6. Connect the antenna cable or cables to the Mobile Broadband card, ensuring that you route the cables correctly.
Subscriber Identity Module (SIM) Card
1. Follow the procedures in Before You Begin.
2. With the cut-off corner on the card facing away from the card compartment, insert the SIM card into the compartment so that it slides under the metal
tabs on the sides.
Back to Contents Page
1
Mobile Broadband card
2
antenna wires (2)
NOTICE: To avoid damaging the Mobile Broadband card, never place cables on top of or under the card.
NOTE: For more specific information about which cable to connect to which connector, see the documentation that came with your Mobile Broadband
card.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
1
SIM card
2
metal brackets (2)
NOTICE: Do not touch the SIM card connectors to protect the card from electrostatic discharge (ESD). To prevent ESD, hold the card in your hand before
you insert or remove the card.