Filter
Top Products
Back to Contents Page
Palm Rest
Dell™Latitude™D620ServiceManual
1. Follow the instructions in Before Working Inside Your Computer.
2. Remove the hinge cover (see Hinge Cover).
3. Remove any devices installed in the media bay (see Media Bay Devices).
4. Remove the keyboard (see Keyboard).
5. Remove the display assembly (see Display Assembly).
6. Remove the internal card with Bluetooth®wireless technology (see Internal Card with Bluetooth® Wireless Technology).
7. Remove the coin-cell battery (see Coin-Cell Battery).
8. Remove the three screws labeled "P" from the top of the palm rest.
9. Turn the computer upside-down.
10. Remove the hard drive (see Hard Drive).
11. Loosen the two captive screws located at the front of the hard drive bay.
12. Remove the seven M2.5 x 8-mm screws from the bottom of the computer.
CAUTION: Before performing the following procedures, follow the safety instructions in the Product Information Guide.
CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.