Filter
Top Products
54 About Your System
Warning!
Unsupported
memory
configuration
detected. The
memory
configuration is
not optimal. The
recommended
memory
configuration
is:
<message>
Invalid memory
configuration. The system
will run but with reduced
functionality.
Ensure that the memory
modules are installed in a
valid configuration.
See "General Memory
Module Installation
Guidelines" on page 119.
If the problem persists,
see "Troubleshooting System
Memory" on page 152.
Write fault
Write fault on
selected drive
Faulty USB device, USB
medium, optical drive
assembly, hard drive, or hard
drive subsystem.
Replace the USB medium or
device. Ensure that the USB,
SAS backplane, or SATA
cables are properly
connected.
See "Troubleshooting a USB
Device" on page 146,
"Troubleshooting an Internal
USB Key" on page 154,
"Troubleshooting an Optical
Drive" on page 155, and
"Troubleshooting a Hard
Drive" on page 156.
NOTE: For the full name of an abbreviation or acronym used in this table, see the
"Glossary" on page 175.
Table 1-3. System Messages (continued)
Message Causes Corrective Actions
book.book Page 54 Tuesday, March 31, 2009 5:26 PM