Filter
Top Products
7
IR Sensor Power
Projector Signal Cable
Projector Power Cord
Figure 4
Figure 5
Installation (continued)
10. Install the (3) screen brackets using:
Wood or steel studs: (3) supplied #8 x 1” screws.
Concrete wall or no studs: (3) supplied #8-10 wall anchors
and (3) supplied #8 x 1” screws.
11. Install projector mount. Refer to the S520 Dual Stud Wall
Mount (MSP-DCCUST2) manual. Do not install
the (2) plastic covers for mount (Figure 4).
12. Run cables for projector up through hole in wall bracket and
cover to projector location (Figure 5).