Filter
Top Products
8
13. Mount screen onto wall bracket by hooking into the back groove of
the screen frame (Figure 6).
NOTE: The bumpers on the back side of the screen/whiteboard are
used to maintain planarity when pressure is applied to the projection
surface during usage. If the bumpers are obstructing installation on
your wall during Steps 13 and 14, they can be removed.
14. Secure bottom of screen to wall using (3) of the supplied #8 x 1/2”
screws through bottom brackets into the lower channel of the screen
frame (Figure 7).
15. Install the (2) top brackets (Figure 8) using:
Wood or steel studs: (2) supplied #8 x 1” screws.
Concrete wall or no studs: (2) supplied #8-10 wall anchors
and (2) supplied #8 x 1” screws.
16. Secure top of screen to wall using (2) of the supplied #8 x 1/2”
screws through top brackets into the top channel of the screen
(Figure 8).
Figure 6
Figure 7 Figure 8
Installation (continued)
DETAIL E
SCALE 1 : 2
E
DETAIL E
SCALE 1 : 2
E