Filter
Top Products
DeviceNet Slave Communication Module DVPDT02-H2
DVP-PLC Application Manual
1
Warning
3
Please read this instruction carefully before use and follow this instruction to operate the device in order to prevent
damages on the device or injuries to staff.
3
Switch off the power before wiring.
3
DVPDT02-H2 is an OPEN TYPE device and therefore should be installed in an enclosure free of airborne dust,
humidity, electric shock and vibration. The enclosure should prevent non-maintenance staff from operating the
device (e.g. key or specific tools are required for operating the enclosure) in case danger and damage on the
device may occur.
3
DVPDT02-H2 is to be used for controlling the operating machine and equipment. In order not to damage it, only
qualified professional staff familiar with the structure and operation of DVPDT02-H2 can install, operate, wire
and maintain it.
3
DO NOT connect input AC power supply to any of the I/O terminals; otherwise serious damage may occur. Check
all the wirings again before switching on the power and DO NOT touch any terminal when the power is switched
on. Make sure the ground terminal
is correctly grounded in order to prevent electromagnetic interference.
Table of Contents
1 INTRODUCTION.................................................................................................................................3
1.1 Features ..................................................................................................................................3
1.2 Specifications ..........................................................................................................................3
2 PRODUCT PROFILE & OUTLINE .....................................................................................................4
2.1 Dimension ...............................................................................................................................4
2.2 Product Profiles.......................................................................................................................4
2.3 DeviceNet Connection Port.....................................................................................................5
2.4 Address Switch........................................................................................................................5
2.5 Function Switch.......................................................................................................................5
2.6 Extension Port.........................................................................................................................6
3 BASIC OPERATION...........................................................................................................................6
3.1 Connecting DVPDT02-H2 to DVP-EH2 Series PLC MPU ......................................................6
3.2 Install DVP-EH2 and DVPDT02-H2 on DIN Rail .....................................................................6
3.3 Connecting to DeviceNet Connection Port..............................................................................7
4 CONFIGURATING DVPDT02-H2.......................................................................................................7
4.1 Format of Request Message and Response Message ...........................................................7
4.2 Control Registers (CR) in DVPDT02-H2 .................................................................................8
4.3 Error Codes.............................................................................................................................9
5 HOW TO CONSTRUCT DEVICENET NETWORK BY DVPDT02-H2................................................9
5.1 Application Example I..............................................................................................................9