Filter
Top Products
Chapter 2 Getting Started the BHT and System Menu
Testing with Ping
Tapping the Ping tab on the NIC Control property displays the screen
shown at left.
Dest IP: Specify the IP address of a host computer that
you want to ping.
Data size: Specify the data size of an echo request.
Interval: Specify the echo request intervals (in units of
100 ms).
Timeout: Specify the timeout period (in units of 100 ms)
for an echo request.
Type 1 or Type 2: Select the echo request send timing Type 1 or
Type 2 (described on the next page).
Count: Specify the number of echo requests to be sent.
To run Ping, tap the Ping Start button or press the ENT key.
Tapping the Ping Start button when the RF device is not opened automatically opens the RF device
and runs Ping.
95