Filter
Top Products
[2.2] ActiveSync (Infrared)
Choosing "2:ActiveSync (Infrared)" on the Communication menu connects the BHT to the host computer
via the Infrared interface port.
Upon completion of connection, the screen shown at left appears.
For details about the configuration of the host computer and
connection using ActiveSync, refer to Chapter 3, Section 3.5
"ActiveSync."
When connecting the BHT to the host computer using ActiveSync (Infrared), arrange the BHT an
d
host computer with their Infrared ports facing directly each other.
When the CU-401 with RS-232C interface is used to connect the BHT with the host, no ActiveSync
can be used.
The BHT can be setup so that ActiveSync, which allows connection with the host computer, begins
automatically if the BHT is placed on the CU-421 while turned on.
For further details, refer to Section 2.5.4, "[3.3] Device Menu".
If ActiveSync connection succeeds
If ActiveSync connection succeeds, the BHT beeps once and displays
the ActiveSync icon (circled in red at left) in the task tray.
If ActiveSync connection fails
If ActiveSync connection fails, the BHT beeps once and does not display the ActiveSync icon.
72