Filter
Top Products
3.5.2 Connection Using ActiveSync
When connected by IrDA, USB, or connector interface
IrDA communication
Arrange the BHT and host computer with their IrDA ports facing directly each other as shown below.
No ActiveSync can be used for connection via the CU-400 (RS-232C interface).
Host Computer
BHT
IrDA communication
For the operating procedure of ActiveSync on the BHT, refer to Chapter 2, Section 2.5.4, "[2.2]
ActiveSync (Infrared)."
Connector interface communication
Connect the BHT (connector interface port) to the host computer (RS-232C interface) by using a
connector interface cable as shown below.
Host Computer
BHT
Connector interface cable
For ActiveSync operating procedures on the BHT, refer to Chapter 2, Section 2.5.4: "[2.3] ActiveSync
(Serial)."
128