Denso BHT-100B Scanner User Manual


 
107
Chapter 2. Getting Started the BHT and System Mode
Problem
The memory is insufficient for setting up the sys-
tem message file.
Solution
Press the C key to return to the SYSTEM MENU,
then delete unnecessary files in the memory. (Re-
fer to Subsection 2.5.3, [ 7 ].
Problem
The memory has already contained 80 files, so the
BHT system message file cannot be set up.
Solution
Press the C key to return to the SYSTEM MENU,
then delete unnecessary files in the memory. (Re-
fer to Subsection 2.5.3, [ 7 ].
Problem
Uploading has failed.
Solution
To retry uploading, press the 1 key.
Pressing the 2 key returns to the SYSTEM MENU.
Check the interface port, communications param-
eters, and communications protocol type in the
SET SYSTEM menu or perform the communica-
tions test in the TEST menu. (Refer to Subsection
2.5.3, [4.5] and [5.5].)
It is also necessary to check the communications
parameters setup of the host computer.