Denso BHT-100B Scanner User Manual


 
49
Chapter 2. Getting Started the BHT and System Mode
Upon completion of downloading, the number of
received records becomes equal to the total
number of records and the beeper beeps once.
Press the C key to return to the DOWNLOAD menu.
If the host computer downloads another new file (if
the BHT receives an ENQ code) when this screen is
displayed, the BHT starts receiving it.
(Refer to the "Ir-Transfer Utility C Guide"/"Ir-Trans-
fer Utility E Guide"/"Transfer Utility Guide.")
If you have selected "2: HT<-->HT COPY" on the
DOWNLOAD menu, a sequence of the above
screens will be repeated by the number of files to
be downloaded.
Problem
The memory is insufficient for storing files to be
downloaded.
Solution
Press the 2 key to return to the SYSTEM MENU,
then delete unnecessary files in the memory or
decrease the size of the file to be downloaded.
(Refer to Subsection 2.5.3, [ 7 ] and [ 2 ].)
If an error occurs during downloading
If some error occurs during downloading, the BHT beeps three times and shows one of
the following screens with the prompt "Retry?":
To retry the download, press the 1 and ENT keys; to abort it, press the 2 and ENT keys.
Problem
You attempted to download the BHT system pa-
rameter file or system message file.
Solution
Check the file you attempted to download. Press
the 2 key to return to the SYSTEM MENU and then
download the file in the appropriate menu (SYS-
TEM PARAMETER transfer menu or SYSTEM MES-
SAGE transfer menu). (Refer to Subsection 2.5.3,
[ 8 ] and [ 10 ].)