Filter
Top Products
Better Edge Backup v5.2
User Guide
Copyright © 2008, Better Edge Technology, Inc. All Rights Reserved.
Page 23 of 121 (September 16, 2008)
iii. Press the [Save Setting] button on the toolbar
The steps above apply only to computers running in a Windows domain. If you don’t have a windows domain with
your network and you are using a workgroup or using a NetWare server, please use the “net use” command to
authenticate the running backup process against the computer hosting the mapped drive. Otherwise, you will get
“Access Denied” error from the backup report.
For example, if you want to backup \\SERVER\SHARE that is located on a NetWare server (or another computer in
a windows workgroup) and you are getting "Network drive is not accessible" error message, please try adding the
following command as a [Pre-backup command]
net use \\SERVER\SHARE [PASSWORD] /USER:[DOMAIN | MACHINE_NAME]\[USERNAME]
E.g.
Enter one of the following commands directly into the Pre-Backup Command:
net use \\Netware\Data password /USER:peter
net use \\WorkgroupComputer1\Data password /USER:WorkgroupComputer1\peter
This will authenticate the current process with the NetWare server (or another computer in a windows workgroup)
and backup will then run correctly.