Filter
Top Products
Dell
PowerEdge R510 Technical Guide 18
4 Mechanical
4.1 Chassis Description
PowerEdge R510 chassis is a 2U rack system. The chassis is not swappable. Supported configurations are
detailed in Table 3.
Table 3. Supported Chassis Configurations
4-HDD Configuration
8-HDD Configuration
12-HDD Configuration
5 x cabled 3.5‖ HDD bay
Non-Redundant 480W PSU
Quad pack diagnostic LED
8 x hot-swap 3.5‖ or 2.5‖ HDD bay
750W redundant PSU (n+0 or n+1
option)
11G diagnostic LCD (identical to the
PowerEdge R710)
12 x hot-swap 3.5‖ or 2.5‖ HDD
bay + 2 x internal cabled 2.5‖ HDD
750W redundant PSU (available for
n+0 or n+1 option)
Rack-ear diagnostic LED
Redundant system cooling
4.2 Dimensions and Weight
Table 4. PowerEdge R510 Weight
4-HDD Configuration
8-HDD Configuration
12-HDD Configuration
Form Factor
2U Rack
Dimension
(HxWxD)
3.40 x 17.19 x 24.09 (in);
86.4 x 436.6 x 610.2 (mm)
3.42 x 17.53 x 26.17 (in);
86.7 x 445.2 x 664.6 (mm)
Max Weight
16 Kg/35.2 lbs
22.5 Kg/49.5 lbs
29.0Kg/63.8lbs
Empty Weight
13.6 Kg/29.92 lbs
13.5 Kg/29.7 lbs
15.85 Kg/34.87 lbs
Table 5. PowerEdge R510 Dimensions
Note:
Measurements in this table correspond to the diagram shown in Figure 3.
PowerEdge
R510
Configuration
Xa
Xb
Y
Za w/ bezel
Za w/o bezel
Zb*
Zc
4 and 8 HDD
482.4 mm
436.6 mm
86.4 mm
35.0 mm
21.0 mm
610.2
mm
642.0
mm
12 HDD
482.4 mm
445.2 mm
86.76 mm
35.0 mm
21.0 mm
664.65
mm
697.05
mm
* Zb goes to the nominal rear wall external surface where the motherboard I/O connectors reside.