Filter
Top Products
24
To close a Bluetooth serial port connection
Connections are normally closed from the client:
• On the client, in the Folders panel of My Bluetooth Places, select (highlight)
the device that is providing the Bluetooth Serial Port service.
• In the right panel of My Bluetooth Places, right-click Bluetooth Serial Port and
then select Disconnect Bluetooth Serial Port from the pop-up menu.
Though not recommended, connections can also be closed from the server:
• On the server, in the Folders panel of My Bluetooth Places, select (highlight)
My Device.
• In the right panel of My Bluetooth Places, right-click Bluetooth Serial Port and
then select Stop to close the service. The service must be re-started before it
will be available to remote devices (right-click Bluetooth Serial Port and select
Start from the pop-up menu).
Dial-Up NetworkingDial-Up Networking
Dial-Up NetworkingDial-Up Networking
Dial-Up Networking
The Dial-up Networking service permits a Bluetooth client to use a modem that is
physically connected to a different Bluetooth device (the server).
After the Bluetooth wireless connection is established the client can use the
server’s modem as if it were a local device on the client.
To establish a Dial-up Networking sessionTo establish a Dial-up Networking session
To establish a Dial-up Networking sessionTo establish a Dial-up Networking session
To establish a Dial-up Networking session
Connections are initiated from the client:
1. On the client, in the Folders panel of My Bluetooth Places, select Entire
Bluetooth Neighborhood.
2. In the right panel of Entire Bluetooth Neighborhood, right-click anywhere except
on a device name and select Refresh from the pop-up menu.
3. In the Folders panel of My Bluetooth Places, right-click the server that will
provide the Dial-up Networking Service and select Discover Available
Services from the pop-up menu to update the available services list. The
available services will be displayed in the right panel of My Bluetooth Places.
4. In the right panel of My Bluetooth Places, double-click Dial-up Networking.
5. In the Connect to dialog box, fill in your user name, password, and the phone
number to be dialed, and then click the Dial button. Select the Save Password
check box and the dialog box will not appear for subsequent connections to the
same phone number.
You can now open a web browser and connect to the Internet.