Filter
Top Products
8
Hardware Installation
The Bluetooth USB Adapter is plug-&-play. After you have the software installed and
have rebooted your PC, you can plug the Bluetooth USB Adapter directly into your
laptop’s or desktop’s USB port. Or you can plug one end of the USB cable to your
computer and plug the Bluetooth USB Adapter to the other end of the USB cable.
When you plug the USB Adapter to the USB port, the green LED on the USB Adapter
should light up.
You may be prompted by a “Add New Hardware Wizard”, Click “Next” on each screen
with the driver CD in your CD-ROM drive to finalize the installation.
Note: The system will show a series of configuration messages in the Windows
system tray only when you have the software and hardware installed for the first
time. When you unplug and plug the USB Adapter subsequently, the system
won’t show the above bubble messages again.