Filter
Top Products
17D-Link DAP-1160 User Manual
Section 3 - Configuration
Wireless
Channel:
Wireless Network
Name(Also called
the SSID):
Mode:
Enable Hidden
Wireless:
Wireless Settings
dlink is the default setting. The SSID is a unique name that identies a network. All devices on a network must share the
same SSID name in order to communicate on the network. If you choose to change the SSID from the default setting, input
your new SSID name in this eld.
Auto channel selection is the select by default. Input a new number if you want to change the default setting. All devices
on the network must be set to the same channel to communicate on the network.
Select Access Point mode,AP Client mode,Bridge mode,Bridge with AP mode or Repeater mode.
Select Enable if you do not want the SSID to be broadcast by the DAP-1160. This prevents the SSID from being seen
by Site Survey utilities, so any wireless clients will have to be pre-congured with the SSID of the DAP-1160 in order to
connect to it.
Wireless
Security Mode:
Select a wireless security setting. Options are None, WEP, WPA, WPA2 or WPA2-Auto.See p.34 for a detailed explanation
of the wireless security options.
Enable Auto
Channel Scan:
Select Enable or Disable. Enable this feature to auto-select the channel for best wireless performance.
Site Survey:
Click this button to choose the root AP from an available connection list. This button is available in AP client and Repeater
mode.