Filter
Top Products
21D-Link DAP-1160 User Manual
Section 3 - Configuration
The Wireless Network Name is a unique
name that identies a network. All devices
on a network must share the same wireless
network name in order to communicate on the
network. If you choose to change the wireless
network name from the default setting, input
your new wireless network name in this
eld.
This option is unavailable in Bridge mode.
This option is unavailable in Bridge mode.
Bridge Settings
This option is unavailable in Bridge mode.
Wireless Network
Name (also called
the SSID):
Site Survey:
Wireless Channel:
Enable Auto
Channel scan:
Enable Hidden
Wireless:
All devices on the network must share the
same channel.
In Bridge mode, The DAP-1160 wirelessly connects multiple networks, without functioning as a wireless AP.
Remote AP MAC:
WDS Security:
None:
WEP64/128:
WPA-PSK/WPA2-
PSK:
Enter the MAC addresses of the APs in your network that will serve as bridges to wirelessly connect multiple networks.
Select WEP 64bits/128bits to limit communication to only those devices that share the same WEP settings.
Select WPA-PSK, WPA2-PSK to secure your network using a password and dynamic key changes (No RADIUS server
required).
Note: Bridge Mode is not completely specified in WiFi or IEEE standards. It can works with other DAP-1160..Communication with other access points is not
guaranteed.
Select None Encryption to across the network.