Filter
Top Products
D-Link EasySmart Switch User Manual
3
3
1
1
NOTE: When 802.1Q Management
VLAN is
enabled, the 802.1Q VLAN should be enabled
first.
VLAN > Port-Base VLAN
Port-Based VLANs are the simplest and most common form of VLAN. It assigns the appliance LAN ports to
VLANs, effectively transforming the appliances. You can assign multiple ports to the same VLAN, or each
port to a separate VLAN.
Figure 249 – VLAN >Port-Based VLAN Settings
Add VLAN: Click to create a new VLAN name and to select VLAN ports. The VLAN name should be less
than 10 characters. To save the members in a group, click Apply.
Rename: Click to rename the VLAN group.
Delete VID: Click to delete the VLAN group.
NOTE: When Port-Based VLAN is enabled, the
802.1Q VLAN settings and 802.1Q management
VLAN settings will be set to Disabled as default.
By default, all ports are untagged.
VLAN > Surveillance VLAN
Surveillance VLAN is a feature that allows you to automatically place the video traffic from D-Link IP cameras
to an assigned VLAN to enhance the IP surveillance service. With a higher priority and individual VLAN,
the quality and the security of surveillance traffic are guaranteed. The Surveillance VLAN function
will check the source MAC address / VLAN ID on the incoming packets. If it matches specified MAC
address / VLAN ID, the packets will pass through switch with desired priority.