Filter
Top Products
40D-Link DI-724GU User Manual
Section 3 - Configuration
LAN
The IP address of your router on the local
area network. Your local area network
settings are based on the address assigned
here. For example, 192.168.0.1.
The subnet mask of your router on the local
area network.
This entry is optional. Enter a domain name
for the local network. The DHCP server will
give this domain name to the computers
on the LAN. So, for example, if you enter
mynetwork.net here, and you have a PC
with a name of chris, that PC will be known
as chris.mynetwork.net. Note, however, if
the router’s WAN settings specify Dynamic
IP Address, and the ISP’s DHCP server
assigns a domain name to the router, that
domain name will override any name you
enter here.
Enable RIP if required by the ISP, if the LAN
has multiple routers, or if the LAN has auto-
IP devices.
This router supports both version 2 and
version 1 of the RIP specification.
V1. Use if none of the routers supports Version 2.
V2 Broadcast. Use if some routers are capable of Version 2, but some are only capable of Version 1.
V2 Multicast. Use if this is the only rounter on the LAN or if all the routers support Version 2.
IP Address:
Subnet Mask:
Local Domain
Name:
Enable RIP:
RIP Operating
mode: