Filter
Top Products
49D-Link DI-724GU User Manual
Section 3 - Configuration
Each list entry can be active or inactive,
according to this selection.
Clicking this button erases edits you have
made to all items in the add/edit area of the
screen.
Enter the range of IP addresses of the
LAN machines that you want the access
control rule to apply to. To specify a single
IP address, enter the address in both the
starting and ending address boxes. Make
sure that the device on the LAN either has a
static IP address (that is, one that is not in the
DHCP range) or is in the DHCP Reservations
List (see Home -> DHCP).
The range of ports that will be denied access
to the Internet. Enter both starting and ending
port numbers. To specify a single port, enter
the port number in both the starting and
ending boxes.
The type of packets that will be blocked from
reaching the Internet. You can block UDP
packets, TCP packets, or both.
Select a schedule for the times when you want the filter to apply. If you do not see the schedule you need in the list of
schedules, go to the Advanced -> Schedules screen and create a new schedule.
This section shows the current IP Filter rules. Rules can be changed by clicking the Edit icon, or deleted by clicking the
Delete icon. When you click the Edit icon, the item is highlighted, and the “IP Filters” section is activated for editing.
Enabled/
Disabled:
Clear:
IP Range:
Port:
Protocol Type:
Schedule:
IP Filter List:
Filters
IP Filters