Filter
Top Products
DSL-200 ADSL USB Modem User’s Guide
13
Installing the Software Driver on Windows 2000
This section describes the procedure used to install a software driver on a PC running
the Windows 2000 operating system. A software driver is required to operate the
Modem. You have a choice of two different drivers, the LAN (Local Area Network) or
WAN (Wide Area Network) driver. Only one driver is needed to operate the Modem and
only one driver should be installed. The following instructions can be used for either the
LAN or WAN driver since the installation procedure is identical for both drivers. If you
are not sure which driver you should install, see the previous section Which Driver to
Install for more information.
Install the Driver
The Plug and Play feature will automatically detect the Modem as soon as the USB
cable connects the Modem and the PC, you will be prompted to begin the installation
with the following window:
1. After the Modem-to-PC USB connection has been made, the “Found New Hardware
Wizard” window will be displayed. Insert the Installation Disk in the CD-ROM drive
if you have not already done so, and click the Next button.