D-Link DSL-200 Modem User Manual


 
DSL-200 ADSL USB Modem User’s Guide
3
Micro-filters
Since ADSL and telephone services share the same copper wire to carry their respective
signals, a filtering mechanism must be used to avoid mutual interference. You will need
to install a micro-filter (low pass filter) device for each telephone that shares the line
with the ADSL line.
Micro-filters are easy to install in-line devices which attach to the
telephone cable between the telephone and wall jack. Your telephone company or ISP
will have more information regarding the use and installation of micro-filters.
VPI and VCI Numbers
You will need to know 2 numbers, the VPI and the VCI numbers, for configuration of
the Modem. Your telephone company or ISP will give you these numbers.
Checklist for Successful Installation of the Modem
Use this list to be sure you have everything you need for successful installation and operation of the
Modem.
PC using Windows 98/98SE or Windows 2000
USB Port
Micro-filters installed
ADSL Cable
ADSL Service
VCI Number _____
VPI Number _____
Driver (on CD-ROM) choose one only:
Install LAN Driver (Protocol: RFC 1483 Bridged Ethernet over ATM) or,
Install WAN Driver (Protocol: RFC 2364 PPP over ATM)