Filter
Top Products
DSL-504G ADSL Router User’s Guide
31
DHCP Server Settings for the LAN
The DHCP server is enabled by default for the Router’s Ethernet LAN interface. DHCP service will supply IP
settings to workstations configured to automatically obtain IP settings that are connected to the Router though
the Ethernet port. When the Router is used for DHCP it becomes the default gateway for DHCP client connected
to it. Keep in mind that if you change the IP address of the Router, you must change the range of IP addresses in
the pool used for DHCP on the LAN.
To display the DHCP Server menu, click the DHCP button in the Home directory. Active DHCP Clients appear
listed in the DHCP Client List below the configuration menu. Information about DHCP clients includes the IP
address, MAC address, host name and lease time are displayed in the list.
Configure DHCP server settings for the LAN
The three options for DHCP service are as follows:
You may use the Router as a DHCP server for your LAN.
You can disable DHCP service and manually configure IP settings for workstations.
You use DHCP service provided by your ISP.
Follow the instructions below according to which of the above DHCP options you want to use. When you have
configured the DHCP Settings as you want them, click the Apply button to commit the new settings. The new
DHCP settings must be saved and the Router must be restarted for the settings to go into effect. To Save &
Reboot the Router, click on the Tools directory tab and then click the Misc (Miscellaneous) menu button. In the
Miscellaneous menu, click he Save & Reboot button.