D-Link DSL-G624T Network Router User Manual


 
DSL-G624T Wireless ADSL Router User Guide
Wireless
To configure the Router’s basic configuration settings without running the Setup Wizard, you can access the windows
used to configure Wireless, WAN, LAN, DHCP, DNS, and Dynamic DNS settings directly from the Home directory.
To access the Wireless Settings window, click on the Wireless link button on the left side of the first window that
appears when you successfully access the web manager.
Wireless Settings window – No Security
Click the Enable AP box to allow the router to operate in the wireless environment.
The SSID identifies members of the Service Set. Accept the default name or change it to something else. If the default
SSID is changed, all other devices on the wireless network must use the same SSID.
What channels are available for use by the access point depends on the local regulatory environment. Remember that all
devices communicating with the device must use the same channel (and use the same SSID). Use the drop-down menu
to select the Channel used for your 802.11g wireless LAN. The wireless channel number is available from your
Internet Service Provider (ISP).
If network Security is not used, click None, then click Apply.
Wireless Security
In the Wireless Settings window, select the type of security you want to configure. The window will change to present
the settings specific to the method being configured. The Router’s wireless security options include three levels of WEP
encryption, WPA for IEEE 802.1x network authentication, and WPA with a user-configured Pre Shared Key (PSK).
24