Filter
Top Products
17
Using the Configuration Utility (continued)
Home > Mode > Remote Static IP Router
Select this option to input the Remote Static IP Address provided by your ISP
WAN - Wireless
LAN - Ethernet
The default IP Address of the Ethernet port is 192.168.0.50
IP Address-
All devices in the network must have the same Subnet Mask
Subnet Mask-
Click Apply if you have made any changes
Click Apply-
Input the IP Address assigned by your ISP
IP Address-
Input the Subnet Mask; all devices in the network must use
the same Subnet Mask
Subnet Mask-
Your ISP will provide this information
ISP Gateway
Address-
Your ISP will provide this information
DNS Server
Address-
NAPT- Select Disable or Enable. NAPT is a form of NAT; it provides
a type of firewall by hiding internal IP Addresses and it works
as an inbound virtual server, with IP based access control