D-Link DWL-1750 Network Router User Manual


 
5
Connections
Special Ethernet Port
Connect one end of the
MIL-C-5015 Ethernet
Cable into this port;
connect the other end
into the Power and
Data Output Port on the
Inline Power Injector.
Special serial port (optional)
Connect one end of the MIL-C-5015 style RS-
232 console port cable to this port; connect the
other end to a Serial Port on a computer that is
running a terminal emulation program. Set the
terminal to 15200 Baud, No Parity, 8 data bits,
1 stopbit and ANSI compatible.
Note: This connection is optional. Use this
console connection only if you are configuring
the DWL-1750 via the console.
Reverse
Polarity -N Type
Connector for
connecting the
antenna or RF
cable.
PoE Power Injector
Attach one end of
the power cord to the
power port; attach the
other end to the wall
outlet.
Data Input Port
Connect one end
of the cross-over
Ethernet cable to
this port; connect
the other end to the
Ethernet port on the
computer.
Power & Data
Output Port
Attach one end of
the special Ethernet
cable to this port;
attach the other
end to the Special
Ethernet Port on the
DWL-1750.