Filter
Top Products
16D-Link DWR-510 User Manual
Section 3 - Configuration
Advanced Settings
1. Check Enabled, if you want to enable MAC address ltering.
Otherwise, check Disabled.
2. Enter up to 10 MAC addresses that can access the device. Only
these devices will be allowed to access your wireless network;
all other devices will be denied access.
3. Click Apply to save the settings.
Internet Settings
1. If you want to enable Auto APN, tick the check box.
2. Enter a prole name, username, password, and APN description.
3. Set the Reconnect Mode to Always On, On Demand, or Manual.
4. Enter a maximum idle time in minutes or choose 0 for innite.
5. Enter a PIN code.
6. Click Apply to save the settings.