Filter
Top Products
34D-Link DWR-510 User Manual
Section 4 - Security
Configure WEP
It is recommended to enable encryption on your wireless router before your wireless network adapters. Please establish wireless connectivity
before enabling encryption. Your wireless signal may degrade when enabling encryption due to the added overhead.
1. Log into the web-based conguration by opening a web browser and entering the IP address of the router (192.168.0.1). Click on
Wireless Settings on the left side.
2. Next to Security Mode, select WEP.
3. Next to WEP Key 1, enter a WEP key that you create. Make sure you enter this key exactly on
all your wireless devices. You may enter up to 4 different keys.
4. Click Save Settings to save your settings. If you are conguring the router with a wireless
adapter, you will lose connectivity until you enable WEP on your adapter and enter the same
WEP key as you did on the router.