Filter
Top Products
2
Resolution
H
××
V
fH (kHz) fV (Hz) Rating Signal mode
Display mode
CP-X880 CP-X885
720 × 400
37.9 85.0 VESA TEXT Zoom in Zoom in
640 × 480
31.5 59.9 VESA VGA (60Hz) Zoom in Zoom in
640 × 480
35.0 66.7 Mac13"mode Zoom in Zoom in
640 × 480
37.9 72.8 VESA VGA (72Hz) Zoom in Zoom in
640 × 480
37.5 75.0 VESA VGA (75Hz) Zoom in Zoom in
640 × 480
43.3 85.0 VESA VGA (85Hz) Zoom in Zoom in
800 × 600
35.2 56.3 VESA SVGA (56Hz) Zoom in
800 × 600
37.9 60.3 VESA SVGA (60Hz) Zoom in
800 × 600
48.1 72.2 VESA SVGA (72Hz) Zoom in
800 × 600
46.9 75.0 VESA SVGA (75Hz) Zoom in
800 × 600
53.7 85.1 VESA SVGA (85Hz) Zoom in
832 × 624
49.7 74.5 Mac16"mode Zoom out Zoom in
1024 × 768
48.4 60.0 VESA XGA (60Hz) Zoom out
1024 × 768
56.5 70.1 VESA XGA (70Hz) Zoom out
1024 × 768
60.0 75.0 VESA XGA (75Hz) Zoom out
1024 × 768
68.7 85.0 VESA XGA (85Hz) Zoom out
1152 × 864
67.5 75.0 VESA SXGA (75Hz) Zoom out Zoom out
1280 × 960
60.0 60.0 VESA SXGA (60Hz) Zoom out Zoom out
1280 × 1024
64.0 60.0 VESA SXGA (60Hz) Zoom out Zoom out
1280 × 1024
80.0 75.0 VESA SXGA (75Hz) Zoom out Zoom out
1280 × 1024
91.2 85.0 VESA SXGA (85Hz) Zoom out Zoom out
1600 × 1200
75.0 60.0 VESA UXGA (60Hz) Zoom out Zoom out
EXAMPLE OF COMPUTER SIGNAL
• Some computers may have multiple display screen modes. Use of some
of these modes will not be possible with this projector.
• Be sure to check jack type, signal level, timing and resolution before connecting this
projector to a computer.
• Depending on the input signal, full-size display may not be possible in some cases.
Refer to the number of display pixels above.
• Although the projector can display signals (except DVI input) with resolution up to
UXGA (1,600 x 1,200), the signal will be converted to the projector’s panel resolution
before being displayed. The best display performance will be achieved if the
resolutions of the input signal and projector panel are identical.
• The image may not be displayed correctly when the input sync. signal is “Composite
Sync.” or “Sync. on G”.
• UXGA (1,600 x 1,200) signals cannot be displayed with DVI input.
NOTE