Dukane 8755E-RJ Projector User Manual


  Open as PDF
of 126
 
19
Settings
Date/Time Settings (Continued)
Click the [Apply] button to save the settings.
Item Description
Daylight Savings Time
Click the [ON] check box to enable daylight savings time and
set the following items.
SNTP Server IP Address
Congures the SNTP server address in IP format.
Cycle
Congures the interval at which to retrieve Date and Time
information from the SNTP server. (hours:minutes).
Start Congures the date and time daylight savings time begins.
Month Congures the month daylight savings time begins (1~12).
Week
Congures the week of the month daylight savings time
begins (First, 2, 3, 4, Last).
Day
Congures the day of the week daylight savings time begins
(Sun, Mon, Tue, Wed, Thu, Fri, Sat).
Hour Congures the hour daylight savings time begins (0 ~ 23).
Minute Congures the minute daylight savings time begins (0 ~ 59).
End Congures the date and time daylight savings time ends.
Month Congures the month daylight savings time ends (1 ~ 12).
Week
Congures the week of the month daylight savings time ends
(First, 2, 3, 4, Last).
Day
Congures the day of the week daylight savings time ends
(Sun, Mon, Tue, Wed, Thu, Fri, Sat).
Hour Congures the hour daylight savings time ends (0 ~ 23).
Minute Congures the minute daylight savings time ends (0 ~ 59).
Time difference
Congures the time difference (hours:minutes).
Set the same time difference as the one set on your PC. If
unsure, consult your network administrator.
SNTP
Click the [ON] check box to retrieve Date and Time
information from the SNTP server and set the following items.
•
The new conguration settings are activated after restarting the network connection.
The network connection must be restarted when the conguration settings are changed, The
network connection can be restarted using [Network Restart] on the main menu.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
• To enable the SNTP function, the time difference must be set.
• The projector will retrieve DATE and TIME information from the Timeserver
and override time settings when SNTP is enabled.
• The Internal Clock’s time may not remain accurate. Using SNTP is
recommended to maintain accurate time.
NOTE
 previous next