Filter
Top Products
3
Fastening the lens cover
To avoid losing the lens cover, please fasten the lens cap to the projector using
the strap.
1.
Fix the strap to the strap ring of the lens cover.
2.
Put the strap into the groove on the rivet.
3.
Push the rivet into the strap hole.
Projector features / Preparations
Projector features
This projector is used to project various computer signals as well as NTSC/PAL/
SECAM, Component (SD, HD) video signals onto a screen. It requires a small
space for installation and produces a large image at a short throw distance.
High Brightness
Newly developed 200W UHB (Ultra High Brightness) lamp gives you a brighter
image on the screen. The image is bright enough for use in fully lighted
rooms.
Low Noise
WHISPER mode is available for reducing acoustic noise and quieter
operation. It is perfect for use in dimly lighted rooms where low noise is more
important than brightness.
Rich Connectivity
This projector has a variety of I/O ports. It can be easily connected to many
signal sources like PC, DVD and so on. The rich connectivity provides you
more options for an impressive presentation.
Compact Body
Even with its many features, this projector has a small form factor.
Preparations
About contents of package
Your projector should come with items indicated on literature sheet.
Contact your dealer immediately if anything is missing.
NOTE • Keep the original packing materials for future reshipment. When
moving the projector, be sure to use the original packing materials. Use special
caution for the lens part.
Strap ring
Strap
Strap hole
Bottom side