Filter
Top Products
56
Maintenance
4.
Apply a vacuum cleaner to the air lter
and the lter cover. Please replace the air
lter when it is damaged or too soiled.
5.
Replace the air lter in its original
position. Secure the air lter in place by
pressing each of the six
locations.
Make sure there is no dust or dirt
remaining after the cover is in place. If any
dust or dirt remains use a vacuum cleaner
to remove it as when placing the lter
cover on the air lter.
Reattach the lter cover to the projector by
aligning the lter cover with the grooves
on the projector. While holding the handle,
push down on the lter cover until it locks
rmly in place.
6.
Turn the projector on and reset the lter
time using the FILTER TIME function in the
OPTION menu
(
41)
.
(1) Press the MENU button to display a menu. When the EASY MENU has
appeared, please skip the next step (2).
(2) Point at the “OPTION” in the left column of the menu using ▼/▲ button, then
press the ► button.
(3) Point at the “FILTER TIME” using ▼/▲ button, then press the ► button. A
dialog will appear.
(4) Press the ▲ button to select “RESET” on the dialog. It performs resetting the
lter time.
Air lter (continued)
Filter cover
Air lter
Air lter’s
knob
mark