Filter
Top Products
10
1) Connect cable to the interactive whiteboard. Install cable run.
2) Do not connect interactive whiteboard cable to the PC yet.
The Interactive whiteboard and PC should have their power off when making all
connections!!! Except the USB connection after the drivers and software has
been installed.
3、
、、
、Install Battery of Electronic Pen
Turn the rear cap of the electronic pen counter-clockwise to open it, load one 1.5V battery
according to the following figure, then tighten the rear cap clockwise.
4、
、、
、Express Installation of IPBOARD DualPen Software
This installation option is recommended for first time installation of the software.
4.1) Insert; IPBOARD DualPen Software CD disc;
4.2) Click on program logo：
4.3) Proceed to Installation Guide window.