Filter
Top Products
5
About Your New Label Maker
With your new DYMO LabelManager
®
350D label
maker, you can create a wide variety of high-quality,
self-adhesive labels. You can choose to print your
labels in many different sizes and styles. The label
maker uses DYMO D1 label cassettes in widths of 1/4”
(6 mm), 3/8” (9 mm), 1/2” (12 mm), 3/4” (19 mm), or
1” (24 mm). Label cassettes are also available in a wide
range of materials.
Visit www.dymo.com for information on obtaining
tapes and accessories for your label maker.
Warranty Registration
Please complete the warranty registration card and
return it to the appropriate customer service address
within seven days of purchase. Visit www.dymo.com
for details.
Getting Started
Follow the instructions in this section to print your first
label.
Connecting the Power
The label maker operates on battery power or with an
optional AC power adapter. To save power, the label
maker will automatically turn off after two minutes of
inactivity.
Inserting the Batteries
The label maker uses six AA batteries.
To insert the batteries
1. Remove the battery compartment cover.
See Figure 2.
Figure 2
2. Insert the batteries following the polarity markings
(+ and –).
3. Replace the battery compartment cover.
x Remove the batteries if the label maker will not
be used for a long period of time.
Connecting the Power Adapter
An optional AC power adapter can also be used to
power the label maker. Connecting the power adapter
to the label maker disconnects the batteries as a power
source.
To connect the power adapter
1. Plug the power adapter into the power connector
on the top, left side of the label maker.
2. Plug the other end of the power adapter into a
power outlet.
Inserting the Tape Cassette
Your label maker comes with one D1 tape cassette.
Visit www.dymo.com for information about
purchasing additional tape cassettes.
To insert the tape cassette
1. Press and release the tape cassette cover to open
the tape compartment. See Figure 3.