Filter
Top Products
DYMO
®
6000 Labelmaker8
Creating your first label
You will no doubt be anxious to see what your new Labelmaker
can do. Before we go on to explore the many advanced features of
the DYMO 6000, follow these simple steps to create your first label.
1. Connect the AC adaptor, plug in and switch on at the wall
socket.
2. Open the cassette compartment lid and check that both the
tape and ink ribbon cassettes are fitted correctly – see Fig. 2.
TAPE
CASSETTE
INK RIBBON
CASSETTE
Print head
Ensure tape and
ribbon are positioned
as shown between
print head and pinch
roller.
Fig. 2— Correct label tape and ink ribbon paths.
If no cassettes are installed, or you need to change one of them,
see ‘Changing cassettes’, page 28.
3. Close the lid, then press
ON/OFF
to switch the power on.
The display should look like this:
A
AUTO